Measurement Tools

FEATURES Resolution: .0005" / 0.01mm Origin memory eliminates the need to reset the reading data each time after the height gauge is turned on. Can be used with a test indicator and holder for precise measurement. Inch/Metric conversion The fine-adjustment allows the slider to...

FEATURES Graduation: .001" / 0.01mm Position is displayed by a combination of the digit counter and the dial. Hand wheel design for both coarse and fine adjustments. Digit counter graduation: Inch .1" / Metric 1mm. The digit counters provide bi-directional positioning and the capability of setting...

FEATURES Graduation:Inch: .001" or 1/128"Metric: 0.02mm or 0.05mm The fine-adjustment allows the slider to be precisely positioned. Stainless steel design. The base is designed with a thermal heat isolation hand grip. *For further inquiries or quotation, please contact us.*Authorized Asimeto Distributor

FEATURES Resolution: .001" /0.02mm or 0.05mm *For further inquiries or quotation, please contact us.*Authorized Asimeto Distributor

FEATURES Resolution: .0005" / 0.01mm ABS system delivery reliable measurement with preset value function, the initial value can be set arbitrarily Zero-setting at any position for incremental measurement Inch/Metric conversion With three shape probes Data Output:Cable data output: 900-05-4/5Wireless data output: Transmitter 901-00-4/6 / Receiver 901-00-3Bluetooth...

FEATURES Resolution: .0005" / 0.01mm The stationary jaw on the beam is designed with vertical movement for the purpose of measuring various steps of different heights Zero-setting at any position Inch/Metric conversion *For further inquiries or quotation, please contact us.*Authorized Asimeto Distributor

FEATURES Resolution:Digital reading: .00005" / 0.001mm 15° and 30° measuring points are avaiable Protection level IP65 For measuring the web thickness of drills, small groove, and other hard to reach dimensions Carbide tipped measuring faces Inch/Metric conversion Read the actual absolute measuring position upon switching...

FEATURES Made of precision ground hardened Stainless Steel Accuracy according to DIN875 *For further inquiries or quotation, please contact us.*Authorized Asimeto Distributor

FEATURES All measuring surfaces of the square models are precision ground to facilitate readings at both horizontal and vertical planes. Range: 200x47mm ; Sensitivity: 0.02mm/m *For further inquiries or quotation, please contact us.*Authorized Asimeto Distributor  

FEATURES Resolution: 10" Measuring range: 0-360° Range selection: 1 x 360°, 2 x 180°, 4 x 90° Accuracy: ±5' Dual reading LCD display arcminutes / decimal degrees With fine adjustment Preset function *For further inquiries or quotation, please contact us.*Authorized Asimeto Distributor

FEATURES This protractor provides an immediate digital reading of any angle in a full circle with 0°-90°-0°-90°-0° readings. The machined Aluminum frame is rigid and light with a precise platform that allows the sensor and its microprocessor circuit to provide high accuracy throughout the entire 360° range...

FEATURES Resolution: .0005" / 0.01mm The origin position is retained through the On/Off cycle Inch/Metric conversion *For further inquiries or quotation, please contact us.*Authorized Asimeto Distributor

Calibration PH Meter  Measurement Range: 4 pH (uncertainty 0.021 pH)7 pH (uncertainty 0.021 pH)10 pH (uncertainty 0.021 pH) Note: Certified by ilac-MRA KANCustomer Portal QR-Code Certificate SystemPickup & Delivery Service for Jabodetabek

Calibration Lux Meter Measurement Range: 5 lux -20 lux (uncertainty 2.2% of reading)50 lux - 200 lux (uncertainty 2.2% of reading)200 lux - 1000 lux (uncertainty 2.4% of reading) Note: Certified by ilac-MRA KANCustomer Portal QR-Code Certificate SystemPickup & Delivery Service for Jabodetabek

Calibration Ring Gauge  Measurement Range: - 3 mm - 10 mm (uncertainty 2.1 µm)- 10 mm - 50 mm (uncertainty 2.2 µm)- 50 mm  - 125 mm (uncertainty 2.4 µm)- 125 mm - 200 mm (uncertainty 3.2 µm) Note: Certified by ilac-MRA KANCustomer Portal QR-Code Certificate...

Calibration Gauge Block  Measurement Range: Grade 0, Grade 1- 0 mm - 0.5 mm (uncertainty 0.17 µm)- 0.5 mm -1 mm (uncertainty 0.14 µm)- 1 mm -2 mm (uncertainty 0.10 µm)- 2 mm - 5 mm (uncertainty 0.10 µm)- 5 mm - 10 mm...

Calibration Digital Caliper Measurement range:- 0 mm - 100 mm (uncertainty 18 µm)- 100 mm - 150 mm (uncertainty 18 µm)- 150 mm - 200 mm (uncertainty 19 µm)- 200 mm - 300 mm (uncertainty 19 µm)- 300 mm - 600 mm (uncertainty 18...

Calibration Thread Ring Gauge Measurement range:Internal: 1.7 mm -100 mm (uncertainty 2.0 µm)Eksternal: 2.9 mm - 150 mm (uncertainty 1.1 µm) Note: Certified by ilac-MRA KANCustomer Portal QR-Code Certificate SystemPickup & Delivery Service for Jabodetabek

Calibration Torque Wrench Measurement range:- 2.2 Nm - 3 Nm (uncertainty 0.20 Nm)- 3 Nm - 12 Nm (uncertainty 0.21 Nm)- 12 Nm - 100 Nm (uncertainty 0.61 Nm)- 100 Nm - 600 Nm (uncertainty 3.0 Nm)- 600 Nm - 1000 Nm (uncertainty 3.0...

Calibrastion Outside Micrometer Measurement range:- 0 mm - 25 mm (uncertainty 0.62 µm)- 25 mm - 50 mm (uncertainty 1.2 µm)- 50 mm - 75 mm (uncertainty 1.3 µm)- 75 mm - 150 mm (uncertainty 1.3 µm)- 150 mm - 175 mm (uncertainty 1.6...